|
|
|
|
|
||||||||||||||||||||||||||||||
| This finished beaded watch is 7" in length. |
Step 1: Using the wire cutters, cut 2 pieces of Soft Flex at 7" each. |
Step 2: Fold the stringing wire in half and slide it through the watch bail. |
Step 3: Slide 3 sterling silver beads onto each stringing wire. |
Step 4: Combine the two stringing wires and slide on a 8mm bead. |
||||||||||||||||||||||||||||||
|
|
|
|
|
||||||||||||||||||||||||||||||
| Step 5: On the combined stringing wires, add a a) daisy spacer b) 6mm bead c) daisy spacer |
Step 6: Separate the stringing wires. On each wire add a) 2mm sterling silver beads b) 4mm bead c) 2mm sterling silver beads |
Step 7: a) Scoot the beads up towards the watch. b) Recombine the stringing wires and slide on a daisy spacer. |
Step 8: On the combined stringing wires, add a a) 6mm bead b) daisy spacer c) 8mm bead |
Step 9: a) Repeat steps 6-8b. b) Slide on a 4mm bead. |
||||||||||||||||||||||||||||||
|
|
|
|
|
||||||||||||||||||||||||||||||
| Step 10: a) Slide a crimp bead on the combined stringing wires. b) Add half of the magnetic clasp. |
Step 11: Loop the combined stringing wires back through the crimp bead. |
Step 12: Use the needle-nose chain pliers to pull the loop tight. |
Step 13: Be sure to leave some wiggle room for the clasp to move freely. |
Step 14: a) Place the crimp bead into the inner jaw (lip-shaped hole) of the crimping pliers. b) Gently squeeze the crimp bead until it forms a hammock. |
||||||||||||||||||||||||||||||
|
|
|
|
|
||||||||||||||||||||||||||||||
| Step 15: To fold the hammock in half, place it into the outer jaw (oval-shaped hole) of the crimping pliers. |
Step 16: Use the needle nose pliers to slightly flatten the crimp bead. |
Step 17: Use the wire cutters to trim off excess stringing wire. Helpful Hint Be sure and trim them one at a time so you don't dull your cutters! |
Step 18: Now that you've finished one end of your beaded watch band, repeat steps 4-17 on the other side of the watch face. |
Helpful Hint: Keep your watch running smoothly by keeping the magnets away from its metal movements. |
||||||||||||||||||||||||||||||

|
Chain-nose plier Wire cutters Crimping pliers Tape measure or ruler |
|||||||||
|
Watch Face |
|||||||||
|
Softflex |
|||||||||
|
A pair of 2x2 crimps |
|||||||||
|
4 8mm beads 6 6mm beads 10 4mm beads |
|||||||||
|
28 2mm Sterling silver round beads |
|||||||||
|
28 4mm Sterling silver daisy spacers |
|||||||||
|
1 8mm Sterling silver magnetic clasp |
|||||||||