Oxidizing Silver with 'Silver Black' Solution
|
Silver Black Solution |
|||
|
Sterling Wire |
|||
|
Sterling Silver Component |
|||
|
Steel Wool |
|||
|
Pro-polish Pads |
|
|
|
||||||||
| Step 1 Make a catch for your component to dip it into the solution with sterling silver wire. |
Step 2 Pour solution into a cup. CAUTION: BE SURE TO MARK A DESIGNATED CUP TO USE. |
Step 5 Dip your component into the solution. |
||||||||
|
|
|
||||||||
| Step 6 Your component will darken completely instantly. |
Step 7 Run the component under water to take off the excess solution. |
Step 9 Brush the component with steel wool. |
||||||||
|
|
|
||||||||
| Step 10 The steel wool will take away the oxidation exposing the texture. |
Step 11 Brush the steel wool on the back side. |
Step 12 Rub the component with a pro-polish pad to shine. |
||||||||
|
| Clean Up! DO NOT POUR INTO DRAIN! To dispose, pour back into the bottle or use baking soda to soak up the excess solution that wasn't used. |
Using with Gemstones Beware when using with gemstones. We found it's safe to be in contact with most of them. DO NOT dip coral or pearls into solution. |
Tip *Works best with components with texture. *Great to use with chain *Brings out stampings and engravings |
Home > Learning Center > Tips and Techniques > Oxidizing Silver with 'Silver Black' Solution
